NAMCL HOME POSTECH DEPARTMENT POSTECH
sub_visual The Best Think Tank sub_container_line

Completed(2005~2009)

HOME :: Publications > Completed(2005~2009)

International (SCI)

97. S.Y. Park, J.H. Kim, M.C. Kim, H.S. Song and C.G. Park

"Microscopic observation of degradation behavior in yttria and ceria stabilized zirconia

thermal barrier coatings under hot corrosion,"

Surface and Coatings Technology , Vol. 190(2-3), pp.357-365 (2005.01)

98. S.Y. Park, M. C. Kim, H.S. Song and C.G. Park,

"Functionally Graded Tungsten Carbide Cobalt Coatings Fabricated by Detonation Gun,″

Materials Science Forum , Vol. 475-479, pp. 1507-1510 (2005.01)

99. Y.S. Yang, S.Y. Park, S.H. Lim D.Y. Ban and C.G. Park,

"Effects of microstructure on the fatigue resistance of high carbon steel tire cords",

Materials Science Forum , Vol. 475-479, pp. 4107-4111 (2005.01)

100. K.M. Lim, K.A. Lee, M.C .Kim, and C.G. Park,

"Complex permeability and electromagnetic wave absorption properties of amorphous alloy-epoxy composites," J. Non-crystalline Solids , Vol. 351, pp. 75-83 (2005.02)

101. Ki Hong Kim, Chang Min Jeon, Sang Ho Oh, Jong-Lam Lee, Chan Gyung Park, Jung Hee Lee,

Kyu Seok Lee and Yang Mo Koo,

"Investigation of Ta/Ti/Al/Ni/Au ohmic contact to AlGaN/GaN heterostructures field-effect transistor," J. Vac. Sci. Technol . B , Vol.23, 322-326 (2005.02)

102. B. J. Yoon, E. H. Hong, S. E. Jee, D.M. Yoon, D. S. Shim, G. Y. Son, Y. J. Lee, K. H. Lee,

H. S. Kim and C. G. Park, "Fabrication of Flexible Carbon Nanotube Field Emitter Arrays by

Direct Microwave Irradiation on Organic Polymer Substrate,"

J. Am. Chem, Soc . Vol. 127, pp. 8234-8235 (2005.03)

103. J. G. Lim, Y. J. Park, Y. M. Park, J. D. Song, W. J. Choi, I. K. Han, W. J. Cho, J. I. Lee,

T. W. Kim, H. S. Kim and C. G. Park,

"Effect of In x Ga 1-x As strain release layers on the microstructural and interband transition properties

of InAs/GaAs quantum dots," J. Cryst. Growth, Vol. 275, pp. 415-421 (2005.03)

104. H. K. Lee, K. M. Park, Y. J. Jeon, D. W. Kim, D. H. Oh, H. S. Kim , C. G. Park and K. M. Kim,

"Vesicle Formed by Amphiphilc Cucurbit[6]uril: Versatile, Noncovalent Modification of the

Vesicle Surface, and Multivalent Binding of Sugar-Decorated Vesicles to Lectin,"

J. Am. Chem. Soc. , Vol. 27, pp. 5006-5007 (2005.03)

105. S. H. Jung, S. H. Jeong, S. U. Kim, S. K. Hwang, P. S. Lee, K. H. Lee, J. H. Ko, E. J. Bae,

D. H. Kang, W. J. Park, H. Y. Oh, J. J. Kim, H. S. Kim, and C. G. Park

"Vertically Aligned Carbon-Nanotube Arrays Showing Schottky Behavior at Room Temperature", Small , Vol. 1, pp. 553-559 (2005.05)

106. Ju Hyung Suh, Yong Seok Lee and Chan Gyung Park,

"Surface termination of SrTiO 3 (111) substrates for the fabrication of epitaxial thin films,"

Mater. Res. Soc. Symp. Pro. , Vol. 839, pp. 85-90 (2005.05)

107. H. S. Kim, J. H. Suh, C. G. Park, S. J. Lee, S. G. Noh, J. D. Song, Y. J. Park, W. J. Choi, and

J. I. Lee, "In Situ HREM Study on the Thermal Stability of Self-assembled InAs/GaAs Quantum

Dots," Mater. Res. Soc. Symp. Proc . Vol. 839, pp. 195-200 (2005.05)

108. Hyung Seok Kim, Ju Hyung Suh, and Chan Gyung Park,

"Topography Evolution of Si (001) Substrate Fabricated by Ar + Ion Beam Sputter-Etching,"

Mater. Res. Soc. Symp. Proc. Vol. 849, pp. 173-178 (2005.05)

109. Sang Woo Kang, Moon Kyun Song, Shi Woo Rhee, Ju Hyung Suh, and Chan Gyung Park,

"Interface and Crystal Structures of Lanthanum Substituted Bismuth Titanate Thin Films Grown

on Si for Metal Ferroelectric Semiconductor Structure,"

Integrated Ferroelectrics , Vol. 72, pp. 61-70 (2005.07)

110. Dong Keun Lee, Dong Shik Kang, Ju Hyung Suh, Chan Gyung Park and Kwang Ho Kim,

"Synthesis and mechanical evaluation of quaternary Ti-Cr-Si-N coating deposited by a hybrid

method of arc ion plating and sputtering techniques,"

Surface & Coating Technology , Vol. 200, pp.1489-1494 (2005.09)

111. H. S. Kim, J. H. Suh, C. G. Park, S. J. Lee, S. K. Oh, J. D. Song, Y. J. Park, W. J. Choi, and

J. I. Lee, "Structure and thermal stability of self-assembled InAs/GaAs quantum dots",

J. Cryst. Growth , Vol. 285, pp. 137-145 (2005.11)

112. S.Y. Park, K.M. Lim, J. Namkung, M.C. Kim and C. G. Park,

"Effects of Si addition on the microstructure and magnetic properties of permalloy strips

fabricated by melt drag casting,″

Scripta Materialia , Vol. 54, 621-625 (2006.02)

113. H. J. Jun, J.S. Kang, D.H. Seo, K.B. Kang and C.G. Park,

“Effects of deformation and boron on microstructure and continuous cooling transformation in low carbon HSLA steels,”

Materials Sci. & Eng. A , 422, 157-162 (2006.05)

114. Sang Ho Oh and Chan Gyung Park,

"Surface Evolution of Strained SrRuO 3 films deposited at various temperatures on SrTiO 3 (001) substrates," J. Materials Res. , 21 (6), 1550-1560 (2006.06)

115. Dong-Myung Yoon, Beom-Jin Yoon, Kun-Hong Lee, Hyung Seok Kim and Chan Gyung Park. "Synthesis of carbon nanotubes from solid carbon sources by direct microwave irradiation" Carbon 44(7), 1298-1352 (2006.06)

116. S.J. Heo, K.H. Kim, M.C. Kang, J. H. Suh, C. G. Park,

"Syntheses and mechanical properties of Mo-Si-N coatings by a hybrid coating system,"

Surface and Coating Technology , 201-7, 4180-4184 (2006)

117. Ju Hyung Suh, HyungSeokKim, ChanGyungPark,“Interfacial structure and crystality of YSZ thin films grown by ion beam sputtering for MFIS-FRAM”, IEEENMDC 1 , 702-703 (2006.10)

118. Kim Dongwoo, Kim Eunju, Kim Jeeyeon, Park Kyeng Min, Baek Kangkyun, Jung

Minseon, Ko Young Ho, Sung Wokyung, Kim Hyung Seok, Suh Ju Hyung, Park Chan Gyung, Na Oh Sung, Lee Dong-ki, Lee Kyng Eun, Han Sung Sik, ●Kim Kimoon,

"Direct synthesis of polymer nanocapsules with a noncovalently tailorable surface",

Angewante Chmie-International vol.46(19), pp.3471-3474 (2007.01)

119. J.S. Kang, Y. Huang, C.W. Lee and ●C.G. Park,

"Effects of Thermo-Mechanical Process on the Microstructure and Mechanical Properties of Low Carbon HSLA Steels", Advanced Materials Research , vol.17, pp.786-791 (2007.01)

120. S.Y. Park, M.C. Kim and ●C.G. Park,,

"Improvement of the Wear Resistance in Nano WC-Co Coatings Fabricated by Detonation Gun Spraying", Materials Science Forum , vol.539, pp.1264-1269 (2007.01)

121. Y.S. Yang, J.G. Bae, D.Y. Ban and ●C.G. Park,

"Effects of drawing strain and annealing on the mechanical properties for heavily cold drawn hyper-eutectoid steel wires", Materials Science Forum , vol.539, pp.4909-4913 (2007.01)

122. S.Y. Park, M.C. Kim, and ●C.G. Park,,

"Mechanical properties and microstructure evolution of the nano-WC/Co coatingsfabricated by detonation gun spraying with post heat treatment",

Mater. Sci. and Eng. A , vol.449, pp.894-897 (2007.03)

123. J. Namkung, M.C. Kim and ●C.G. Park,

"Effects of Si Addition on the magnetic properties of melt-quenched Ni-Fe alloy stip,"

Mater. Sci. and Eng. A , Vol.449-451, pp.430-434 (2007.03)

124 . K.M. Lim, S.Y. Park, J. Namkung, M.C. Kim, and ●C.G. Park,

"The relationship between microstructure and magnetic properties of Si-containing permalloy strips fabricated by melt drag casting", Mater. Sci. and Eng. A , vol.449, pp.444-447. (2007.03)

125 . S.H. Jung, E. Oh, ●K.H. Lee, S.H. Jeong, Y.S. Yang and C.G. Park,,

"Fabrication of Diameter-tunable Well-aligned ZnO Nanorod Arrays via a Sonochemical Route", Bull. Korean Chem. Soc , vol.28, pp.1457-1462 (2007.04)

126. Sang Ho Oh, Ju Hyung Suh, ●Chan Gyung Park,

"Defects in Strained Epitaxial SrRuO 3 Films on SrTiO3 Substrates",

Materials Transactions , Vol.48(10), pp.2556-2562 (2007.10)

127. J.S. Kang, S.S. Ahn, C.Y. Yoo, and ●C.G. Park,,

"FIB and TEM studies on the bainitic microstructure in low carbon HSLA steels",

Advanced Materials Research , vol.26, pp.73-76 (2007.10)

128 . Y.S. Yang, J.G. Bae and ●C.G. Park,,

"Measurement of Residual Stress in Thin-sized Steel

Wires by using Focused Ion Beam and Digital Image Correlation Method",

Advanced Materials Research , vol.26, pp.1187-1190 (2007.10)

129. J.H. Suh, Y.S. Lee, and ●C.G. Park,

"Terrace Formation of SrTiO3(111) Substrates for Epitaxial Thin Film Growth with

Various Etching", Advanced Materials Research , vol.26, pp.1203-1206 (2007.10)

130. H.S. Kim, J.H. Suh, ●C.G. Park, S.J. Lee, S.K. Noh, J.D. Song, Y.J. Park, W.J. Choi and J. I. Lee,

"Microstructures and Growth Characteristics of Self-assembled InAs/GaAs Quantum Dots Investigated by Transmission Electron Microscopy", Advanced Materials Research , vol.26, pp.1207-1210 (2007.10)

131. Han-Bo-Ram Lee, Gil Ho Gu, J. Y. Son, C. G. Park, and ●Hyungjun Kim,,

"High quality epitaxial CoSi2 using plasma nitridation-mediated epitaxy: The effects of the capping layer". J. Appl. Phys , Vol.102(10) pp.094509 (2007.11.)

132. Seung-Ho Jung, Eugene Oh, ●Kun-Hong Lee, Yosep Yang, Chan-Gyung Park, Wanjun Park, Soo-Hwan Jeong,

“Sonochemical preparation of shape-selective ZnO nanostructures”,

Crystal Growth & Design , Vol. 8, No. 1, pp. 265-269 (2008.01)

133. J. H. Park, ●H. M. Jang, H. S. Kim, C. G. Park and S. G. Lee,

"Strain-mediated magnetoelectric coupling in BaTiO 3 -Co nanocomposite thin films,"

Applied Phys. Lett. , Vol.92, No. 6, pp.062908 (2008.02)

134. Y. S. Yang, J. G. Bae and ●C. G. Park,

“Improvement of the bending fatigue resistance of the hyper-eutectoid steelwires used for tirecords by using post-annealing process,”

Materials Sci. & Eng., A , Vol.488, pp.544-561 (2008.08)

135. Y. S. Yang, J. G. Bae and ●C. G. Park,

“Measurement of residual stress by using focused ion beam and digital image correlation method in thin-sized wires used for steel cords,”

J of Physics , Vol. 100, 012018 (2008.08)

136. Sang-Joon Park, W.J. Maeng, Y. S. Yang, C. G. Park, ●Hyungjun Kim, Kook-Nyung Lee, Suk-Won Jung, W. K. Seong,

“Effect oxygen exposure on the quality of atomic layer deposition of ruthenium from bis(cyclopentadientl)ruthenium oxygen,”

Thin Solid Films , vol.516, No. 21, pp.7345?7349 (2008.09)

137. Kibum Kang, Gil Ho Gu, Dong An Kim, Chan Gyung Park, and ●Moon-Ho Jo,

“Self-Organized Growth of Ge Nanowires from Ni-Cu Bulk Alloys,”

Chem. Mater., Vol. 20, No.21, pp. 6577-6579 (2008.09)

138. Han-Bo-Ram Lee, Gil Ho Gu, Chan Gyung Park, ●Hyung Jun Kim,

“Spontaneous Formation of Vertical Magnetic-Metal-Nanorod Arrays During Plasma- Enhanced Atomic Layer Deposition,”

Small , Vol.4, No.12, pp. 2247-2254 (2008.12)

139. Ju seok Kang, ●Chan Gyung Park,

“Characterization of bainatic microstructure in low carbon HSLA steels"

Inter. J of Modern Physics B , Vol 22, No 31&32, pp5696 (2008.12),

140. L. Renauld, I. Martin, F. Hillion, F. Horreard, Y. S. Yang, J. S. Kang, ●C. G. Park.

“3D Atom Probe and SIMS as complementary techniques for the observation and quantitative measurement of microstructure”

Microscopy and Microanalysis , Vol. 14, pp. 1232-1233 (2008. 12)

141. H. S. Kim, J. Suh, ●C. G. Park, S. J. Lee, S. K Noh, J. D. Song, Y J. Park, W. J. Choi, J. I. Lee,

“Effects of the thickness of GaAs spacer layers on the structure of multilayer stacked InAs quantum dots" Journal of Crystal Growth , Vol.311, pp.258-262 (2009.01)

142. Y. S. Yang, J. G. Bae and ●C. G. Park,

“Prediction of the delamination in the pearlitic steel filaments by 3 dimensional atom probe tomography” Int'l J. of Modern Physics B. Vol. 22, pp. 5471 (2009.02)

143. Kim E, Lee J, Kim D, Lee KE, Han SS, Lim N, Kang J, Park CG, ●Kim K,

“Solvent-responsive polymer nanocapsules with controlled permeability : encapsulation and release of a fluorescent dye by swelling and deswelling”

Chem. Commun , Vol. pp. 1472-1477. (2009.03)

144. G. H. Gu, ●C. G. Park and K.B .Nam,

“Inhomogeneity of a highly efficient InGaN based blue LED studied by three-dimensional atom probe tomography,” Phys. Status Solidi RRL , Vol. 3, No. 4, pp.100-102 (2009.03)

145. Y. S. Yang, J. G. Bae and ●C. G. Park,

“Nanostructure and mechanical properties of heavily cold drawn steel wires used for tire cords” Materials Sci. & Eng., A , Vol.508, pp. 148-155 (2009.5)

146. W.J. Maeng , Gil Ho Gu, C. G. Park, K. Lee, T. Lee, ●H. J. Kim

“HfO2/HfOxNy/HfO2 gate dielectric fabricated by in Situ oxidation of plasma-enhancedatomic layer deposition HfN middle layer” J of Electrochemical Society , Vol.156(8) G109-G113 (2009.10)

147. Eun-Ha Kim, Da-Hye Park, So-Ye Park, ●Kun-Hong Lee, Hyung Seok Kim, and Chan Gyung Park, “Synthesis of amorphous Si nanowires from solid Si Source using microwave irradiation" T hin Solid Films , Vol. 517, No.24, pp. 6629-6634 (2009.10)

148. Sanjeev Das, J.B. Seol, Y.C. Kim, ●C. G. Park,

“Structure and Mechanical Properties of Ni-Cr Alloy Produced by Single Roll Strip

Casting,” Materials & Design , Vol. 31, No. 1, pp.570-573 (2010.01)

149. Sanjeev Das, N.S. Lim, J.B. Seol, H.W. Kim, ●C. G. Park,

“Effect of the rolling speed on microstructural and mechanical properties of aluminum- magnesium alloys prepared by twin roll casting,”

Materials & Design , Vol. 31, No. 3, pp.1633-1638 (2010.03)

150. S.P Ryu, N.K. Cho, J.Y Lim, W.J. Choi, J.D. Song, J.I. Lee, C.G Park

“Effect of different strain reducing layers on InAs quantum dots grown by migration enhanced epitaxy ” Physica E , Vol. 42, pp. 1536-1539 (2010.03)

151. Hoon Huh, Jong-Hun Yoon, Chan-Gyung Park, Ju-Seok Kang, Moo-Young Huh and Hyung-Gu Kang, “Correlation of microscopic structrues to the strain rate hardening of SPCC steels,” Int'l j. of Mechanical Science , Vol. 52, No. 5, pp.745-753 (2010.05)

152. Han-Bo-Ram Lee, Sung-Hwan Bang, Woo-Hee Kim, Gil Ho Gu, Young Kuk Lee, Taek-Mo Chung, Chang Gyoun Kim, C. G. Park, and Hyungjun Kim,

“Plasma-Enhanced Atomic Layer Deposition of Ni,”

Japanese Journal of Applied Physics , Vol.49, No.5 pp.05FA11-14 (2010.05)

153. Sanjeev Das, N.S. Lim, H.W. Kim, ●C. G. Park,

“Effect of heat treatment on microstructural and mechanical properties of twin roll casted

Al-0.55-Mg-0.02Ti alloy,” Materials & Design, Vol.31, No.06, pp. 3111-3115 (2010.06)

154. Eunju Kim, Dongwoo Kim, Hyuntae Jung, Jiyeong Lee, Somak Paul, Narayanan Selvapalam, Yosep Yang, Namseok Lim, Chan Gyung Park, and Kimoon Kim “Facile, Template-Free Synthesis of Stimuli-Responsive Polymer Nanocapsules for Targeted Drug Delivery” Angewandte chemie-international edition, Vol.49, No.26, pp.4405-4407 (2010.6)

155. Jae-Bok Seol, Gil-Ho Gu, Nam-Suk Lim, Sanjeev Das, ●C. G. Park

“Atomic scale investigation on the distribution of boron in medium carbon steels by Atom Probe Tomography and EELS,” Ultrmicroscopy, Vol. 110, No. 7, pp.783-788 (2010.06)

156. Chang-Soo Lee, Jungwon Kim, Gil Ho Gu, Du-Hwan Jo, Chan Gyung Park, Wonyong Choi and Hyungjun Kim, “Photocatalytic activities of TiO2 thin films prepared on Galvanized Iron substrate by plasma-enhanced atomic layer deposition,”

Thin solid Films , Vol. 518, No. 17, pp.4757-4761 (2010.06)

157. Dongwoo Kim, Eunju Kim, Jiyeong Lee, Soonsasng Hong, Wokyung Sung, Namseok Lim,

ChanGyung Park, and Kimoom Kim

“Direct Synthesis of Polymer Nanocapsules: Self-Assembly of Polymer Hollow Spheres through Irreversible Covalent Bond Formation,”

J. Am. Chem. Soc. ,Vol.132, No.38, pp. 9908-9919 (2010. 7)

158. Sanjeev Das, J.B. Seol, Y.C. Kim and ●C.G. Park

“Formation of NiO nanowires on the surface of nickel strips”

J. of Alloys and Compounds. Vol. 505, No. 1, pp. L19-L21 (2010.08)

159. N.S. Lim, S. Das, S.Y. Park, M.C. Kim and ●C.G. Park

“Fabrication and microstructural characterization of nano-structured WC/Co coatings,”

Surface and Coatings Technology, Vol. 205, No. 2, pp.430-435 (2010.10)

Domestic

50. 김형석, 서주형, 박찬경

“ 이온 빔 스퍼터 에칭에 의한 Si(001) 기판의 표면구조 변화,”

대한금속재료학회지, 43 (1), 68-73 (2005. 1)

51. 김형석, 서주형, 박찬경, 이상준, 노삼규, 송진동, 박용주, 최원준, 이정일,

"원자층 에피탁시 성장시킨 InAs/GaAs (001) 양자점의 구조 및 열적 안정성,"

대한금속재료학회지, 43(8) pp.544-552 (2005.08).

52. 배종구, 양요셉, 반덕영, 박찬경,

“고 탄소강 와이어의 냉간 인발 시 다이 디자인과 다이 시리즈가 표면 잔류 응역에 미치는 영향,” 한국소성가공학회지, 15(2), 153-157 (2006.03)

53. Hyung Seok Kim, Ju Hyung Suh, Chan Gyung Park, Sang Jun Lee, Sam Gyu Noh, Jin Dong Song, Yong Ju Park and Jung Il Lee,

"TEM Study on the Growth Characteristics of Self-Assembled InAs/GaAs Quantum Dots", Korean J. of Electron Microscopy, 36- 1, 35-40 (2006)

54. 김형석, 서주형, 박찬경, 이상준, 노삼규, 송진동, 박용주, 최원준, 이정일,

"투과전자현미경으로 살펴본 자발형성 InAs/GaAs 양자점의 구조 및 응력 특성",

대한금속재료학회지, 44(7), 518-526 (2006.07)

55. 설재복, 구길호, 김형석, 서주형, 박찬경,

"TFT-LCD 신호 배선용 Al 박막의 hillock 형성과 미세구조에 미치는 Mo 하부층 두께의 영 향", 대한금속재료학회지, Vol 44(11), 776-781 (2006.11)

56. 강주석, 김득중, 박찬경

"저탄소 ? 저합금강의 Ti-Nb-V 복합 탄질화물 형성 및 기계적 특성에 미치는 V 첨가의 효 과", 한국소성가공학회지, Vol. 15(8), pp. 581-585 (2006.12)

57. 박성용, 남궁정, 김문철, 김상선, 이상석, 박찬경,

"Fe-Ni 인바(invar) 합금 박판의 가공성 향상을 위한 방향성 조직 제어,"

한국소성가공학회지, 15(8), 586-590 (2006.12)

58. 이용석, 서주형, 박찬경,

"SrTiO3(111) 기판의 테라스 형성에 따른 에피택시 BLT 박막의 성장특성",

대한금속재료학회지, 45 , pp.527-533, 대한금속재료학회, (2007.09)

59. 윤종헌, 허 훈, 박찬경, 강주석, 서주영, 허무영, 강형구,

“철강재료 변형률속도 경화의 미시적 관찰,” 한국소성가공학회지, Vol. 17(1), pp. 46-51 (2008)

60. 양요셉, 배종구, 박찬경,

“신선 가공에 의한 세멘타이트 재분해가 기계적 특성에 미치는 영향” 대한금속재료학회지, vol. 46(30), pp. 111-117 (2008)

61. 양요셉, 배종구, 박찬경,

“고 강도 극 세선의 피로 특성 향상을 위한 특정 인자 제시” 한국소성가공학회지, vol. 17(2), pp. 91-96 (2008)